LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2002 >> Aerio SX, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Power Brake Booster >> Removal & Installation

Removal & Installation

  1. Remove master cylinder. See MASTER CYLINDER . Disconnect vacuum hose from power brake booster. Disconnect push rod clevis from brake pedal arm. On Swift with ABS, remove ABS actuator. On all models, remove 4 nuts attaching power brake booster to firewall. Remove power brake booster.
  2. To install, reverse removal procedure. Check and adjust push rod clevis and piston rod. See BRAKE BOOSTER PUSHROD (BRAKE PEDAL HEIGHT)  and BRAKE BOOSTER PISTON ROD  under ADJUSTMENTS. Bleed hydraulic system. See BLEEDING BRAKE SYSTEM .
scientia non olet · About LEMON Manuals