Brake Booster PUSHROD (Brake Pedal Height)
Remove vacuum brake booster from vehicle. See POWER BRAKE BOOSTER under REMOVAL & INSTALLATION. Measure distance between booster mounting surface (with gasket on) and center of clevis pin hole. See Fig 1. Adjust push rod if not within specification. See BOOSTER PUSHROD LENGTH table.
BOOSTER PUSHROD LENGTH
| Application | In. (mm) |
|---|---|
| Aerio | 4.11-4.15 (104.5-105.5) |
| Esteem | 4.51-4.55 (114.5-115.5) |
| Grand Vitara & Vitara | 4.31-4.35 (109.5-110.5) |
| Swift | 3.92-3.96 (99.5-100.5) |
| XL-7 | 4.31-4.35 (109.5-110.5) |