DTC Confirmation Test
WARNING: This page is about a different car, the 2002 Suzuki Esteem. However, it is still accessible from the selected car via links, so may be relevant.
Turn ignition off, connect scan tool and turn ignition on. Using scan tool, clear DTCs. See CLEARING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. Start engine and allow it to reach normal operating temperature. Raise engine speed to 2000 RPM and hold for 2 minutes. Using scan tool, check for current or pending DTC P0141. See RETRIEVING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. If DTC resets, go to DIAGNOSIS & REPAIR PROCEDURE .