Heater Unit Removal & Installation: Installation
WARNING: This page is about a different car, the 2003 Suzuki Vitara and 2002 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.
- Install heater unit by reversing removal procedure, noting the following items.
- When installing each part, be careful not to catch any cable or wiring harness.
- When installing steering column assembly, see INSTALLATION , Steering Column.
- Install control cables. See HEATER CONTROL CABLES REMOVAL & INSTALLATION .
- Fill engine coolant to radiator.
- Enable air bag system, if equipped. See DISABLING & ACTIVATING AIR BAG SYSTEM .
- Evacuate and charge system. See OPERATION PROCEDURE FOR CHARGING A/C WITH REFRIGERANT .