LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1990 >> Swift GS, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL - VINS [3,5] & 1.6L 4-CYL - VIN [0] >> Removal & Installation >> Intake Manifold >> Removal

Intake Manifold: Removal

  1. Release fuel pressure. See FUEL PRESSURE RELEASE  . Disconnect negative battery cable. Drain cooling system. Remove air intake hoses and air breather hoses.
  2. Remove air cleaner assembly. Disconnect all electrical connections from intake manifold, injectors and throttle body. Disconnect vacuum hoses from intake manifold.
  3. Disconnect coolant hoses from manifold and remove upper radiator hose. Remove fuel supply and return lines from delivery pipe. On Sidekick, remove throttle body. On Swift GT, remove injector connectors. Disconnect all control cables.
  4. Remove intake manifold-to-cylinder head bolts. Remove intake manifold and gasket. Remaining components can be removed from intake manifold as required.
scientia non olet · About LEMON Manuals