LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1990 >> Swift GS, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL - VINS [3,5] & 1.6L 4-CYL - VIN [0] >> Removal & Installation >> Cylinder Head (Samurai) >> Removal (Samurai)

Removal (Samurai)

  1. Release fuel pressure. See FUEL PRESSURE RELEASE  . Remove intake and exhaust manifolds. See INTAKE MANIFOLD  and EXHAUST MANIFOLD  .
  2. Remove timing belt. See TIMING BELT. Loosen cylinder head bolts in reverse order of tightening sequence. See Figure . Loosen head bolts in 2 or 3 steps to prevent cylinder head warpage. Remove bolts and cylinder head.
scientia non olet · About LEMON Manuals