LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2024 >> WRX TR >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Intake System (Induction) And Turbocharger >> Oil Catch Tank >> Removal

Oil Catch Tank: Removal

CAUTION:
  • Vehicle components are extremely hot immediately after driving. Be wary of receiving burns from heated parts.
  • If the engine oil is spilled over the engine, exhaust pipe or the under cover, completely wipe it off to avoid emission of smoke or causing a fire.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the air intake duct. Ref. to INTAKE (INDUCTION) (H4DOTC)>AIR INTAKE DUCT>REMOVAL .
  3. Unlock the blow-by diagnosis connector, and disconnect the PCV hose assembly No. 2 from the PCV hose assembly No. 1.
    G13620019Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the under cover front. Ref. to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER>REMOVAL .
  5. Remove the clip from the hose stay, and remove the engine oil hose.
    CAUTION: Prepare a container for draining of engine oil, and drain the engine oil in the oil catch tank.
    G14610501Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the oil catch tank.
G14610502Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals