LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2024 >> Impreza Base >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag System >> Passenger's Airbag Module >> Removal

Passenger's Airbag Module: Removal

CAUTION:
  • Refer to "CAUTION" of "General Description" before handling the airbag system components. Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  • Be careful not to damage the airbag system harness when servicing the instrument panel. Damage may cause the system to malfunction.
NOTE: Components: Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>COMPONENT>PASSENGERS AIRBAG MODULE .
  1. Turn the ignition switch to OFF.
  2. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  3. Remove the instrument panel assembly. Ref. to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL ASSEMBLY>REMOVAL .
  4. Remove the passenger's airbag module.
    1. Remove the screws.
    2. Release the claw.
    3. Remove the passenger's airbag module.
    G14612233Courtesy of SUBARU OF AMERICA, INC.
    G16764033Courtesy of SUBARU OF AMERICA, INC.
      Meaning of pictograms indicated on the label
    (A) Flammable explosive substance encapsulated parts; be careful of handling.
    (B) Indicates that this part is an airbag module.
    (C) Before handling, always refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM" in the service information.
      For the disposal procedures of the airbag modules, refer to "Airbag Module Disposal"
    (D) Do not disassemble the airbag module.
scientia non olet · About LEMON Manuals