LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2024 >> Impreza Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control/Communication System >> Body Integrated Unit >> Removal

Body Integrated Unit: Removal

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
NOTE: Components: Ref. to BODY CONTROL/COMMUNICATION SYSTEM>GENERAL DESCRIPTION>COMPONENT>BODY INTEGRATED UNIT .
  1. When replacing the body integrated unit, check and record the current settings. Ref. to BODY CONTROL (DIAGNOSTICS)>REGISTRATION BODY INTEGRATED UNIT>OPERATION>CONFIRM CURRENT SETTING .
  2. Prepare all immobilizer keys already registered. (Model without keyless access with push button start (except for C5 model))
  3. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  4. Remove the cover LWR driver. Ref. to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL LOWER COVER>REMOVAL .
  5. Remove the knee airbag module. Ref. to AIRBAG SYSTEM>KNEE AIRBAG MODULE>REMOVAL .
  6. Remove the body integrated unit.
    1. Disconnect connectors.
    2. Remove the bolt.
    3. Remove the nut.
    4. Remove the body integrated unit.
G13201466Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals