LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2023 >> Ascent Limited >> Repair and Diagnosis >> Electrical >> Gauges >> Instrumentation System & Driver Information Center >> Switches and Harness >> Removal >> Illumination Control Switch

Illumination Control Switch

  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the cover LWR driver. Ref. to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL LOWER COVER>REMOVAL .
  3. Remove the illumination control switch.
    1. Release the claws and remove the illumination control switch (d).
G13625465Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals