| Power will not turn ON. Illumination does not light. |
Ref. to COMBINATION METER (DIAGNOSTICS)>DIAGNOSTICS WITH PHENOMENON>INSPECTION>POWER WILL NOT TURN ON. ILLUMINATION DOES NOT LIGHT |
| TFT LCD display freezes and does not accept any operation entry. |
Ref. to COMBINATION METER (DIAGNOSTICS)>DIAGNOSTICS WITH PHENOMENON>INSPECTION>TFT LCD DISPLAY FREEZES AND DOES NOT ACCEPT ANY OPERATION ENTRY |
| The screen is blacked out, or the screen is not displayed |
Ref. to COMBINATION METER (DIAGNOSTICS)>DIAGNOSTICS WITH PHENOMENON>INSPECTION>THE SCREEN IS BLACKED OUT, OR THE SCREEN IS NOT DISPLAYED |
| System is reset |
Ref. to COMBINATION METER (DIAGNOSTICS)>DIAGNOSTICS WITH PHENOMENON>INSPECTION>SYSTEM IS RESET |
Ambient temperature display error
(excessively high or low, no change, or no display) |
Ref. to COMBINATION METER (DIAGNOSTICS)>DIAGNOSTICS WITH PHENOMENON>INSPECTION>AMBIENT TEMPERATURE DISPLAY ERROR (EXCESSIVELY HIGH OR LOW, NO CHANGE, OR NO DISPLAY) |
| Faster/slower vehicle speed than the actual speed is displayed |
Ref. to COMBINATION METER (DIAGNOSTICS)>DIAGNOSTICS WITH PHENOMENON>INSPECTION>FASTER/SLOWER VEHICLE SPEED THAN THE ACTUAL SPEED IS DISPLAYED |
| More/less fuel than the actual amount is displayed |
Ref. to COMBINATION METER (DIAGNOSTICS)>DIAGNOSTICS WITH PHENOMENON>INSPECTION>MORE/LESS FUEL THAN THE ACTUAL AMOUNT IS DISPLAYED |
| Fuel level warning light illuminates despite of sufficient fuel |
Ref. to COMBINATION METER (DIAGNOSTICS)>DIAGNOSTICS WITH PHENOMENON>INSPECTION>FUEL LEVEL WARNING LIGHT ILLUMINATES DESPITE OF SUFFICIENT FUEL |
| Engine coolant temperature light blinks in red and blue alternately |
Ref. to COMBINATION METER (DIAGNOSTICS)>DIAGNOSTICS WITH PHENOMENON>INSPECTION>ENGINE COOLANT TEMPERATURE LIGHT BLINKS IN RED AND BLUE ALTERNATELY |
| Door indicator is not displayed |
Ref. to COMBINATION METER (DIAGNOSTICS)>DIAGNOSTICS WITH PHENOMENON>INSPECTION>DOOR INDICATOR IS NOT DISPLAYED |
| Clearance indicator does not illuminate |
Ref. to COMBINATION METER (DIAGNOSTICS)>DIAGNOSTICS WITH PHENOMENON>INSPECTION>CLEARANCE INDICATOR DOES NOT ILLUMINATE |
| HI beam indicator does not illuminate |
Ref. to COMBINATION METER (DIAGNOSTICS)>DIAGNOSTICS WITH PHENOMENON>INSPECTION>HI BEAM INDICATOR DOES NOT ILLUMINATE |
| Front fog light indicator does not illuminate |
Ref. to COMBINATION METER (DIAGNOSTICS)>DIAGNOSTICS WITH PHENOMENON>INSPECTION>FRONT FOG LIGHT INDICATOR DOES NOT ILLUMINATE |
| Illumination is fixed at the maximum brightness |
Ref. to COMBINATION METER (DIAGNOSTICS)>DIAGNOSTICS WITH PHENOMENON>INSPECTION>ILLUMINATION IS FIXED AT THE MAXIMUM BRIGHTNESS |