LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> WRX Premium, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Eyesight System >> EyeSight Assist Monitor >> Removal

EyeSight Assist Monitor: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
  2. Remove the grille speaker side. Ref. to ENTERTAINMENT & MONITORING>FRONT SPEAKER>REMOVAL>TWEETER
  3. Remove the grille front defroster. Ref. to AIR CONDITIONER>SUNLOAD SENSOR (AUTO A/C MODEL)>REMOVAL
  4. Remove the EyeSight assist monitor.
    1. Remove the screws.
    2. Disconnect the connector and remove the EyeSight assist monitor.
      G14613222Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals