LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> WRX Premium, Standard Trans >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brake System >> Rear Brake Pad >> Replacement >> Electronic Parking Brake Model >> When The SUBARU Select Monitor Is Available

When The SUBARU Select Monitor Is Available

  1. Release the parking brake.
  2. Execute the brake maintenance mode. Ref. to PARKING BRAKE>PARKING BRAKE SYSTEM>OPERATION>BRAKE MAINTENANCE MODE .
  3. Remove the pad COMPL. Ref. to BRAKE>REAR BRAKE PAD>REMOVAL>ELECTRONIC PARKING BRAKE MODEL .
  4. Push back the piston disc brake.
  5. Install the pad COMPL. Ref. to BRAKE>REAR BRAKE PAD>INSTALLATION>ELECTRONIC PARKING BRAKE MODEL .
  6. Exit the brake maintenance mode. Ref. to PARKING BRAKE>PARKING BRAKE SYSTEM>OPERATION>BRAKE MAINTENANCE MODE .
  7. After the operation is completed, apply and release the parking brake five times and ensure that the brake operates normally.
scientia non olet · About LEMON Manuals