LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2022 >> WRX Premium, Standard Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Window Motors & Regulators >> Window Glass & Mirrors >> Relay and Fuse >> Removal >> Circuit Breaker

Circuit Breaker

CAUTION:

Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to  AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION 

  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY
  2. Remove the cover LWR driver. Ref. to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL LOWER COVER>REMOVAL
  3. Remove the circuit breaker.
    1. Disconnect the connector.
    2. Release the clip, and remove the circuit breaker.
      CAUTION:

      Be careful not to apply excessive force when pulling the clip, as the clip may become damaged. 

      G13938769Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals