Lane Departure Prevention Assist (White Line) Cancel Code(s) Display: Operation

This displays the reason why the lane departure prevention (white line) function was canceled.

1. On [Start] screen, select [Diagnosis].
2. On [Vehicle selection] screen, input the target vehicle information and select [OK].
3. On [Main Menu] screen, select [Each System].
4. On [Select System] screen, select [EyeSight], and then select [Enter].
5. On [Select Function] screen, select [Cancel Code].
6. On [Cancel Code] screen, select [Lane Departure Prevention Assist (White Line) Cancel Code(s) Display].
   NOTE:

   • For detailed operation procedures, refer to "Help" of application. 
   • Up to 10 codes can be stored. When 11 codes or more are output, the oldest code among the most generated codes will be deleted to store the latest code. 
   • Stored codes will be cleared by Clear Memory. Ref. to  COMMON (DIAGNOSTICS)>CLEAR MEMORY 
   • For details on the lane departure prevention (white line) cancel code, refer to the list of lane departure prevention (white line) cancel code. Ref. to  EYESIGHT (DIAGNOSTICS)>LANE DEPARTURE PREVENTION ASSIST (WHITE LINE) CANCEL CODE(S) DISPLAY>LIST