LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Forester Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat System - Seats >> Seat Heater System >> Removal >> Seat Heater Unit >> Rear Seat

Rear Seat

CAUTION:
  • If the seat heater unit is removed, replace the pad assembly with a new part.
  • If the seat heater unit is reused, remove the polyurethane section and double-sided tape from the reverse side completely. Be sure to use new double-sided tape.

Preparation items: 

Double-sided tape: NITTO DENKO 501L or equivalent

  1. Prior to starting work, check the following precautions. Ref. to SEATS>General Description>CAUTION .
  2. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .
  3. Remove the rear seat. Ref. to SEATS>Rear Seat>REMOVAL .
  4. Remove the rear seat surface. Ref. to SEATS>Rear Seat>DISASSEMBLY .
  5. Remove the seat heater unit.
scientia non olet · About LEMON Manuals