Mil (Malfunction Indicator Lamp)

WARNING: This page is about a different variant/trim than selected.

The MIL is illuminated when the power switch is first turned on (IG), before the READY light comes on.
When the READY indicator turns on, the MIL should turn off. If the MIL remains illuminated, the diagnosis system has detected a malfunction or abnormality in the system.
NOTE: If the MIL is not illuminated when the power switch is first turned on (IG), check the MIL circuit. Ref. to ENGINE (DIAGNOSTICS) (H4DO(HEV))>WARNING LIGHT ILLUMINATION PATTERN .