LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> Crosstrek Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Manual Transaxle & Differential (6MT)) >> Transfer Case and Extension Case Assembly >> Assembly >> Transfer Case

Transfer Case

WARNING: This page is about a different variant/trim than selected.
  1. Install the shift link assembly to the transfer case. Ref. to MANUAL TRANSMISSION AND DIFFERENTIAL (6MT)>SHIFT LINK ASSEMBLY>INSTALLATION .
  2. Replace the precoat bolt and gasket with new parts, and Install the interlock plate.
    NOTE: Clean the bolt threads before installing the interlock plate.

    Tightening torque:  20 N.m (2.0 kgf-m, 14.8 ft-lb)

    G13937674Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals