Clutch Disc and Cover: Removal

WARNING: This page is about a different variant/trim than selected.

Remove the manual transmission assembly.
- 5MT model: Ref. to MANUAL TRANSMISSION AND DIFFERENTIAL (5MT)>MANUAL TRANSMISSION ASSEMBLY>REMOVAL .
- 6MT model: Ref. to MANUAL TRANSMISSION AND DIFFERENTIAL (6MT)>MANUAL TRANSMISSION ASSEMBLY>REMOVAL .
Attach the ST on the flywheel.
Preparation tool:

ST: CLUTCH DISC GUIDE (499747100)

Courtesy of SUBARU OF AMERICA, INC.
Remove the clutch cover and clutch disc.
CAUTION:
- Take care not to allow oil to adhere to the clutch disc face .
- Do not disassemble the clutch cover or clutch disc .
Remove the release bearing & lever. Ref. to CLUTCH SYSTEM>RELEASE BEARING AND LEVER> REMOVAL .