Intake Duct No. 2
- Remove the air intake duct. Ref. to INTAKE (INDUCTION) (H4DOTC)>Air Intake Duct>REMOVAL .
- Remove the intercooler. Ref. to INTAKE (INDUCTION) (H4DOTC)>Intercooler>REMOVAL .
- Remove the under cover front. Ref. to EXTERIOR/INTERIOR TRIM>Front Under Cover>REMOVAL .
- Remove the bolt and release the spring lock to remove the intake duct No. 2.
NOTE:
Move the both ends of the spring to the cutouts of the intake duct No. 2 using a flat tip screwdriver wrapped with protection tape.