LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> SUBARU Eyesight System (Driver Assist) (Diagnostics) >> Diagnostics with Phenomenon >> Inspection >> Lane Keep Switch Is Not Turned To On (Lane Keep Indicator Light Does Not Illuminate In White)

Lane Keep Switch Is Not Turned To On (Lane Keep Indicator Light Does Not Illuminate In White)

  1. PERFORM REAL TIME DIAGNOSIS  .

    Check the input signal of cruise control system. Refer to EyeSight (DIAGNOSTICS)>Real-time Diagnosis .

    Is the check result OK?

    Yes  : Go to  3.

    No  : Go to  2.

  2. CHECK LANE KEEP SWITCH  .

    Check the lane keep switch. Refer to EyeSight (DIAGNOSTICS)>Diagnostics with Phenomenon>INSPECTION>CHECK EyeSight STEERING SWITCH .

    Is the check result OK?

    Yes  : Go to  3.

    No  : Repair or replace the faulty portion according to the inspection result.

  3. CHECK COMBINATION METER  .

    Check the combination meter. Refer to COMBINATION METER (DIAGNOSTICS)>Basic Diagnostic Procedure>PROCEDURE .

    Is the check result OK?

    Yes  : Replace the stereo camera. Refer to EYESIGHT>STEREO CAMERA .

    No  : Replace the EyeSight steering switch.

scientia non olet · About LEMON Manuals