LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belt System >> Front Seat Belt >> Removal >> Seat Belt Inner - Front

Seat Belt Inner - Front

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  1. Prior to starting work, check "Precautions" in the "SEATS" service information. Ref. to SEATS>GENERAL DESCRIPTION>CAUTION .
  2. Turn the ignition switch to OFF.
  3. Disconnect the ground terminal from the 12V engine restart battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
    NOTE:
    • For the hybrid model, disconnect the battery negative terminal.
    • For models with the power seat, move the seat to the front-most position before disconnecting the ground terminal from the 12V engine restart battery sensor or disconnecting the battery negative terminal.
  4. Remove the front seats. Ref. to SEATS>FRONT SEAT>REMOVAL .
  5. Remove the seat belt inner - front.
    1. Remove the clip for the inner seat belt harness located under the seat cushion.
    2. Remove the nut, and remove the seat belt inner - front.
      G13605355Courtesy of SUBARU OF AMERICA, INC.
      G13605356Courtesy of SUBARU OF AMERICA, INC.
      G11245889Courtesy of SUBARU OF AMERICA, INC.
      NOTE: For details about harness routing behind the seat, refer to "SEATS" service information. Ref. to SEATS>FRONT SEAT>ASSEMBLY .
scientia non olet · About LEMON Manuals