LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (CVT Transaxle (Th2A)) >> Transmission Harness >> Removal >> Inhibitor Harness

Inhibitor Harness

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission body. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TH2A)>TRANSMISSION ASSEMBLY>REMOVAL .
  2. Remove the inhibitor harness from the transmission body.
    1. Remove the clips and disconnect the connector from the sensor. (LH side)
      G13233229Courtesy of SUBARU OF AMERICA, INC.
    2. Remove the clips and disconnect the connectors from the inhibitor switch and sensor. (RH side)
      G13233230Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals