Active Test: List

WARNING: This page is about a different variant/trim than selected.

Active test items	Contents	Execution condition	Note
Compression Test	Maintain the cranking and measure the compression.	IG ON, system normal, not cranking mode, other active test not in progress	Continuously operate the generator in order to maintain the cranking [Target Value] ON/OFF [Present Value] Not performed/being performed
Activate the Inverter Water Pump	Continuously operate Inverter water pump	IG ON, system normal, not in maintenance mode, Battery (12V) voltage 9.5 V or more	Before performing the active test, check the inverter coolant amount. Related data monitor Inverter Coolant Water Temperature Inverter Water Pump Duty Ratio Inverter Water Pump Revolution Auxiliary Battery Voltage

Active test items

Contents

Execution condition

Note

Compression Test

Maintain the cranking and measure the compression.

IG ON, system normal, not cranking mode, other active test not in progress

Continuously operate the generator in order to maintain the cranking
[Target Value]

[Present Value]

Activate the Inverter Water Pump

Continuously operate Inverter water pump

IG ON, system normal, not in maintenance mode, Battery (12V) voltage 9.5 V or more

Related data monitor