LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Fuel Injection System (HEV)) >> High Pressure Fuel Delivery Pipe >> Removal >> High-Pressure Fuel Delivery Pipe

High-Pressure Fuel Delivery Pipe

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Be careful not to spill fuel.
  • Catch the fuel from the pipes using a container or cloth.
  1. Disconnect the ground terminal from battery. Refer to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the intake manifold assembly. Refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO (HEV))>INTAKE MANIFOLD ASSEMBLY>REMOVAL .
  3. Remove the fuel pipe insulator No. 3. Refer to FUEL INJECTION (FUEL SYSTEMS) (H4DO (HEV))>FUEL INSULATOR>REMOVAL .
  4. Remove the high-pressure fuel delivery pipes.
    G13230892Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the fuel pipe protector No. 2.
    NOTE: Perform this procedure when required.
    G13230893Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals