DTC P2138-2B: Throttle/Pedal Position Sensor/Switch "D"/"E" Signal Cross Coupled: Notes
WARNING: This page is about a different variant/trim than selected.
Outline of diagnosis:
Malfunction of main. sub sensor system wire connection
Either of the following conditions remains for a predetermined period of time: voltage difference between the main sensor and sub sensor is 0.02 V or less, or both the main sensor and sub sensor are Low malfunction
(1 trip detection logic)
Trouble symptom:
Greatly reduced output power
NOTE:
For the diagnostic procedure, refer to DTC P212012. Ref. to P-HEV HYBRID POWERTRAIN CONTROL (DIAGNOSTICS)>DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)>DTC P212012 THROTTLE/PEDAL POSITION SENSOR/SWITCH "D" CIRCUIT SHORT TO AUXILIARY BATTERY .