LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (P-HEV Hybrid Powertrain Control System (Diagnostics) (2 Of 2)) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC P0E61-9E: Hybrid/EV Battery Charger Enable Circuit Stuck On >> General Description >> Monitor Description

Monitor Description

WARNING: This page is about a different variant/trim than selected.

A malfunction is detected and the MIL is illuminated when the following condition is met:

Battery charger input current is detected when the battery charger start permission signal is not output from the Hybrid vehicle control ECU assembly.