LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Crosstrek Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (HVAC System (Heater, Ventilator And A/C) (HEV)) >> Solenoid Valve >> Installation >> High Pressure Solenoid Valve

High Pressure Solenoid Valve

WARNING: This page is about a different variant/trim than selected.
CAUTION: Replace the O-rings with new parts, and then apply compressor oil to install completely.
  1. Install the HI solenoid valve.

    Tightening torque: 

    Expansion valve & solenoid valve: Ref. to AIR CONDITIONER (HEV)>GENERAL DESCRIPTION>COMPONENT>EXPANSION VALVE & SOLENOID VALVE .

  2. Install expansion valve - cooler assembly. Ref. to AIR CONDITIONER (HEV)>EXPANSION VALVE>INSTALLATION>COOLER VALVE .
  3. Connect the battery ground terminal. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
  4. Charge refrigerant. Ref. to AIR CONDITIONER (HEV)>REFRIGERANT CHARGING PROCEDURE>PROCEDURE .