Front Disc Rotor: Installation

NOTE: Before installation, remove mud and foreign matter from the disc brake assembly.

Check the disc rotor. Refer to BRAKE>FRONT DISC ROTOR>INSPECTION .
Install the disc rotor.
Install the disc brake assembly.
CAUTION:
- Use a new mounting bolt. (Impreza model)
- Use a wobble extension to tighten the upper side mounting bolt with the specified torque. (Except for Impreza model)
Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

Mounting bolt: Refer to BRAKE>GENERAL DESCRIPTION>COMPONENT>FRONT DISC BRAKE .

Brake hose bracket: 33 N.m (3.4 kgf-m, 24.3 ft-lb)
Install the front wheels.
Tightening torque:

120 N.m (12.2 kgf-m, 88.5 ft-lb)