LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX STI Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Lubrication System (Except For STI)) >> Scavenge Pump >> Removal

Scavenge Pump: Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION: If engine oil is spilt onto the exhaust pipe, wipe it off with cloth to avoid emission of smoke or causing a fire.
  1. Remove the oil pipe assembly. Refer to LUBRICATIONS EXCEPT FOR STI)>OIL PIPE>REMOVAL>OIL PIPE ASSY .
  2. Remove the bolts which secure the scavenge pump to the intake rear camshaft cap RH and the cam carrier RH. Using a crowbar, remove the scavenge pump.
    CAUTION: Be careful not to damage the mating surfaces of the cylinder head and scavenge pump.
    G10267325Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the liquid gasket from the scavenge pump, intake rear camshaft cap RH, and cam carrier RH.
scientia non olet · About LEMON Manuals