LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> WRX STI Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine Cooling System (Except For STI)) >> Water Pipe Assembly >> Removal >> Water Pipe Assembly RH

Water Pipe Assembly RH

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground terminal from battery sensor. Refer to NOTE>NOTE>BATTERY .
  2. Drain engine coolant. Refer to COOLING (EXCEPT FOR STI)>ENGINE COOLANT>REPLACEMENT>DRAINING OF ENGINE COOLANT .
  3. Remove the oil pipe assembly. Refer to LUBRICATION (EXCEPT FOR STI)>OIL PIPE>REMOVAL>OIL PIPE ASSY .
  4. Remove the front exhaust pipe. Refer to EXHAUST (EXCEPT FOR STI)>FRONT EXHAUST PIPE>REMOVAL .
  5. Disconnect the water hose (A) from the water pipe assembly RH, and remove the bolt (B) securing the water pipe assembly RH to the cam carrier RH.
    G09476398Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the bolt (A) which secures the water pipe assembly RH to the cylinder head RH.
  7. Disconnect the water pipe hose RH (B) from oil pan upper, and remove the water pipe assembly RH.
    G09480755Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals