Fuel Flap
- Open the fuel flap and remove the fuel filler cap.
- Turn the fuel filler pipe protector in the direction of the arrow to unlock and remove it.
- Remove the trim panel - trunk side RH.
- Remove the cable assembly - fuel inside the quarter panel.
- Disconnect the ring clips.CAUTION: Always replace with a new part, because engagement of the claw weakens.
- Remove the saucer - COMPL.CAUTION: Be careful not to damage by forcibly prying at the rubber portion with a flat tip screwdriver or similar tool.
- Attach the protective tape (A) to the panel side outer.
- Hold the position shown in the figure with your hands, release the claw and pull out toward yourself.
- While pulling out toward yourself, remove the rubber portion from the fuel filler pipe using a flat tip screwdriver or similar tool wrapped with a protection tape.
- Pull out while tilting toward the front of vehicle.
- Remove the flap - COMPL fuel from the saucer - COMPL.