Front Seat Inner Belt ASSY: Installation

NOTE: The following procedure is for LH side. Perform the work for the RH side referring to the procedures for the LH side.

Installation of the front seat inner belt ASSY LH (driver's side)

Install the front seat inner belt ASSY LH with the nut and the washer.

Standard value: T=42 N.m {428kgf.cm} {31.0ft.lbf}

CAUTION:

Be careful not to allow the front seat inner belt ASSY LH ride over the location.
Make sure to put the wave washer when installing the front seat inner belt ASSY.

Courtesy of SUBARU OF AMERICA, INC.

Engage the claw and 5 clamps, and install the wiring harness of the front seat inner belt ASSY LH.
Install the rubber band of the separate type front seat backrest cover LH.

Installation of the front seat inner belt ASSY RH (passenger's side)

Install the front seat inner belt ASSY RH with the nut and the washer.

Standard value: T=42 N.m {428kgf.cm} {31.0ft.lbf}

CAUTION:

Be careful not to allow the front seat inner belt ASSY RH ride over the location.
Make sure to put the wave washer when installing the front seat inner belt ASSY.

Courtesy of SUBARU OF AMERICA, INC.

Engage the claw and the clamp, and install the wiring harness of the front seat inner belt ASSY RH.

Installation of the front seat cushion shield INN LH (driver's side) (Refer to INSTALLATION )
Installation of the front seat ASSY LH (Refer to INSTALLATION )
Inspection of airbag warning light (Refer to AIRBAG WARNING LIGHT ILLUMINATION PATTERN )