LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical System >> Cylinder Head Gasket (FA20) >> Removal

Cylinder Head Gasket (FA20): Removal

  1. Cam carrier RH removal (Refer to REMOVAL )
  2. Cylinder head RH removal
    1. Loosen the six cylinder head bolts equally in the order as shown in the figure.
    2. Tap the cylinder head RH with a plastic hammer to separate it from cylinder block.
    3. Remove the cylinder head RH.
    CAUTION: Be careful not to scratch the mating surface of cylinder head and cylinder block.
    Fig 1: Cam Carrier RH Bolts Loosening Sequence
    G12586557Courtesy of SUBARU OF AMERICA, INC.
  3. Cylinder head gasket removal
    1. Remove the cylinder head gasket.
  4. Cam carrier LH removal (Refer to REMOVAL )
  5. Cylinder head LH removal
    1. Loosen the six cylinder head bolts equally in the order as shown in the figure.
    2. Tap the cylinder head LH with a plastic hammer to separate it from cylinder block.
    3. Remove the cylinder head LH.
    CAUTION: Be careful not to scratch the mating surface of cylinder head and cylinder block.
    Fig 2: Cam Carrier LH Bolts Loosening Sequence
    G08554154Courtesy of SUBARU OF AMERICA, INC.
  6. Cylinder head gasket NO. 2 removal
    1. Remove the cylinder head gasket NO. 2.
scientia non olet · About LEMON Manuals