LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Thermostat (FA20/For Engine Coolant) >> Installation

Thermostat (FA20/For Engine Coolant): Installation

  1. Thermostat installation
    1. Install a new gasket to the thermostat.
    2. Install the thermostat to the thermostat cover.
  2. Thermostat cover installation
    1. Install the thermostat cover with the two bolts.

      Standard value: T=6.4N.m {65kgf.cm} {4.7ft.lbf} 

  3. Radiator outlet hose connection
    1. Align the marks marked when removing the hose, install the radiator outlet hose to the thermostat cover and secure the hose with the hose clamp.
  4. Installation of exhaust manifold (Refer to INSTALLATION )
  5. Replenishing of coolant (SUBARU Super Coolant) (Refer to COOLANT (FA20) )
  6. Leak check of coolant (SUBARU Super Coolant) (Refer to COOLING SYSTEM (FA20) )
scientia non olet · About LEMON Manuals