Instrument Panel Speaker: Installation

NOTE: The procedures described below are for the RH side. Perform the same procedures for the LH side.

Install the speaker ASSY FR No. 3.
CAUTION: Do not touch the diaphragm body, edge or center cap parts of speaker ASSY FR No. 3.
1. Connect the connector.
2. Install the speaker ASSY FR No. 3 and fasten the two bolts.
  Standard value: T=7.5N.m {77kgf.cm} {5.5ft.lbf}
Installation of the speaker ASSY FR No. 2
CAUTION: Do not touch the diaphragm of speaker ASSY FR No. 2.
1. Engage the three tabs and install the speaker ASSY FR No. 2 onto the instrument panel speaker panel SUB-ASSY No. 1.
Installation of instrument panel speaker panel SUB-ASSY NO. 1 (Refer to INSTALLATION , Step 10)