LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2019 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Brake System (Hydraulic) >> Brake Pedal (MT Model) >> Installation

Brake Pedal (MT Model): Installation

  1. Installation of stop light switch mounting adjuster
    1. Engage 2 clamps, and install the stop light switch mounting adjuster.
  2. Brake pedal height check adjustment (Refer to ADJUSTMENT )
  3. Brake pedal free play check (Refer to BRAKE PEDAL (MT MODEL) )
  4. Brake pedal clearance check (Refer to BRAKE PEDAL (MT MODEL) )
  5. Installation of stop light switch ASSY (Refer to INSTALLATION )
  6. Installation of instrument panel under cover SUB-ASSY No. 1 (Refer to INSTALLATION )
  7. Installation of instrument side panel LH (Refer to INSTALLATION , Step 8)
  8. Installation of clutch pedal SUB-ASSY (Refer to ADJUSTMENT , Step 4)
scientia non olet · About LEMON Manuals