LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2018 >> WRX Limited, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation System & Driver Information Center (Service Information) >> Switches And Harness >> Removal >> Illumination Control Switch

Illumination Control Switch

  1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. Ref. to NOTE>NOTE>BATTERY
    NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
  2. Remove the cover assembly - instrument panel LWR Driver OUT. Ref. to EXTERIOR/INTERIOR TRIM>Instrument Panel Lower Cover>REMOVAL
  3. Remove the illumination control switch.
    1. Release the claws and remove the illumination control switch.
      G12456069
scientia non olet · About LEMON Manuals