LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Outback 2.5i >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System (Heater, Ventilator And A/C) (Service Information) >> Control Unit >> Removal

Control Unit: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to BATTERY
    NOTE: Repair Contents.
  2. Remove the pocket assembly and the back panel - pocket. Ref. to REMOVAL , Glove Box.
  3. Remove the control module.
    1. Disconnect the connector.
    2. Remove the screws, and remove the control module.
    Fig 1: Identifying Control Module Screws
    G10276802Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals