LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Outback 2.5i >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System (Heater, Ventilator And A/C) (Service Information) >> Air Vent Grille >> Removal >> Center Grille Assembly

Center Grille Assembly

  1. Disconnect the ground terminal from battery sensor. Ref. to BATTERY
    NOTE: Repair Contents.
  2. Remove the grille assembly - CTR ventilation.
    1. Release the clips and claws.
    2. Disconnect the connector and remove the grille assembly - CTR ventilation.
      Fig 1: Identifying Air Vent Grille Clips And Claws
      G10311426Courtesy of SUBARU OF AMERICA, INC.
    3. Remove the switch - hazard. Ref. to REMOVAL , Hazard Switch.