LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Outback 2.5i >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System >> Hazard Switch >> Removal

Hazard Switch: Removal

  1. Disconnect the ground terminal from battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  2. Remove the center grille assembly. <Ref. to CENTER GRILLE ASSEMBLY , REMOVAL, Air Vent Grille.>
  3. Release the claws, and then remove the switch - hazard.
    Fig 1: Switch - Hazard Claws
    G10277220Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals