LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 3.6R Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Cooling System (H4DO)) >> Water Pipe Assembly >> Removal >> Water Pipe Assembly RH

Water Pipe Assembly RH

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground terminal from battery sensor. Ref. to BATTERY
    NOTE: Repair Contents.
  2. Drain engine coolant. Ref. to DRAINING OF ENGINE COOLANT , REPLACEMENT, Engine Coolant.
  3. Remove the front exhaust pipe. Ref. to REMOVAL , Front Exhaust Pipe.
  4. Disconnect the engine coolant hose (A) from the water pipe assembly RH, and remove the bolt (B) securing the water pipe assembly RH to the cam carrier RH.
  5. Remove the bolt (D) which secures the water pipe assembly RH to the cylinder head RH.
  6. Disconnect the water pipe hose RH (C) from oil pan upper, and remove the water pipe assembly RH.
Fig 1: Identifying Engine Coolant Hose, Water Pipe Hose And Bolts (RH)
G10262977Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals