Heater Core: Removal

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to CAUTION , General Description.

Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to BATTERY
NOTE: Repair Contents.
Remove the heater and cooling unit assembly. Ref. to REMOVAL , Heater and Cooling Unit.
Remove the heater core.
1. Remove the screws, and remove the duct - foot driver.
  
  Fig 1: Identifying Foot Driver Duct Screw
  Courtesy of SUBARU OF AMERICA, INC.
2. Remove the screw and detach the heater pipe cover.
  
  Fig 2: Identifying Heater Pipe Cover Screw
  Courtesy of SUBARU OF AMERICA, INC.
3. Remove the screw and remove the heater pipe clamp.
  
  Fig 3: Identifying Heater Pipe Clamp Screw
  Courtesy of SUBARU OF AMERICA, INC.
4. Remove the heater core.
Fig 4: Removing Heater Core
Courtesy of SUBARU OF AMERICA, INC.