LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> Legacy 2.5i Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Mechanical (H6DO)) >> Engine Mounting >> Removal >> Main Mounting Bracket & Main Cushion Rubber

Main Mounting Bracket & Main Cushion Rubber

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground terminal from battery sensor. Ref. to BATTERY
    NOTE: Repair Contents.
  2. Remove the cradle. Ref. to REMOVAL , Cradle.
  3. Remove the main mounting bracket from the cradle. Ref. to REMOVAL , Electric Power Steering Gearbox.
  4. Remove the main cushion rubber from the main mounting bracket.
Fig 1: Identifying Mounting Bracket Main Cushion Rubber Bolts
G11566359Courtesy of SUBARU OF AMERICA, INC.