V-Belt TENSIONER Assembly

WARNING: This page is about a different variant/trim than selected.

Install the V-belt tensioner assembly.
NOTE: When installing the V-belt tensioner assembly, insert the protrusion of V-belt tensioner assembly into the hole for preventing rotation at the generator bracket.

Fig 1: Inserting Protrusion Of V-Belt Tensioner Assembly Into Hole
Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

25 N.m (2.5 kgf-m, 18.4 ft-lb)
Install the cap to the V-belt tensioner assembly.
Install the V-belts. Ref. to MECHANICAL(H4DO)>V-belt>INSTALLATION>V-BELT .