DTC P1C00 Battery Monitor Module "A" Performance: Notes
WARNING: This page is about a different variant/trim than selected.
DTC detecting condition:
Immediately at fault recognition
CAUTION:
After servicing or replacing faulty parts, perform Clear Memory Ref. to ENGINE (DIAGNOSTICS) (H4DO)>Clear Memory Mode
. and Inspection Mode Ref. to ENGINE (DIAGNOSTICS) (H4DO)>Inspection Mode
.
- CHECK DTC
.
Check for DTC. Ref. to ENGINE (DIAGNOSTICS) (H4DO)>Read Diagnostic Trouble Code (DTC) .
Is P1C00 displayed in [DTC]?
- Yes: Replace the battery sensor. Ref. to STARTING/CHARGING SYSTEMS(H4DO)>Battery Sensor .
- No: Even if DTC is detected, it has returned to a normal condition at this time. Reproduce the failure, and then perform the diagnosis.