Execution Condition

WARNING: This page is about a different variant/trim than selected.

Secondary Parameters	Execution condition
Battery voltage	≥ 10.9 V
Starter relay feedback voltage <	Battery voltage x 0.35 V
TCM range status	= "P" range or "N" range

Secondary Parameters	Execution condition
Battery voltage	≥ 10.9 V
Change from driving condition a) to b)	= 3time(s)
a) Vehicle speed	≤ 0km/h (0MPH)
and Engine speed	≥ 550 RPM and ≤ 850 RPM
b) Vehicle speed	≤ 64km/h (39.8MPH)
and Engine speed	≥ 1450 RPM and ≤ 2050 RPM