Diagnostic Method
WARNING: This page is about a different variant/trim than selected.
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value |
|---|---|
| Voltage of the neutral position switch signal | ≥ Battery voltage x 0.6 V |
Time needed for diagnosis: 64 ms
Malfunction indicator light illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.
Judge NG when the malfunction criteria below are completed determined times or more after the neutral SW change.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value |
|---|---|
| Neutral switch output voltage | ≥ Battery voltage x 0.6 V |
Time needed for diagnosis: 3time(s)
Malfunction indicator light illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.