Clutch Pedal: Installation

WARNING: This page is about a different variant/trim than selected.

Install in the reverse order of removal.
CAUTION: Always use a new clevis pin.

Tightening torque:

Clutch pedal

18 N.m (1.8 kgf-m, 13.3 ft-lb)

Knee airbag module

7.5 N.m (0.76 kgf-m, 5.5 ft-lb)

Air intake boot

3 N.m (0.3 kgf-m, 2.2 ft-lb)
Adjust the clutch pedal after installation. Ref. to CLUTCH SYSTEM>Clutch Pedal>ADJUSTMENT .
Check the clutch start system.