Brake Pipe: Installation

CAUTION:

Yellow connectors and harnesses with yellow tapes around them are the connectors and harnesses for the airbag system. Using a tester above such circuits may cause malfunction of airbag system. Follow the cautions of "AIRBAG SYSTEM" in this case. Ref. to AIRBAG SYSTEM>General Description>CAUTION .
- Yellow connectors and harnesses with yellow tapes around them are the connectors and harnesses for the airbag system. When using a tester on these circuits, follow the cautions of "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>General Description>CAUTION .
- Be careful not to damage the airbag system wiring harness when servicing the electrical parts around the steering column.
Be careful not to damage the airbag system wiring harness when servicing the center brake pipe.
When installing the brake pipe, do not bend.
After installing the brake pipe and hose, perform air bleed.
After installing the brake hoses, make sure that they do not contact the tires or suspension assembly, etc.

NOTE: The airbag system wiring harness is routed near the center brake pipe.

Tightening torque: